Home

How Do You Deep Clean RV Seats and Upholstery?

To deep clean RV seats and upholstery, identify the material, vacuum seams and crevices, treat stains and choose a cleaning method that suits the covering. You may be able to use controlled wet extraction on fabric, while leather and vinyl usually need gentle surface cleaning. With any method, keep moisture away from cushion foam, stitching, electrical parts and seat mechanisms as much as possible.

Check your upholstery's cleaning instructions

Start with the care label beneath the seat or cushion, then check the RV or furniture manufacturer's instructions. Similar-looking coverings can need different treatments, particularly coated fabric, synthetic suede, faux leather and genuine leather.

Use these common upholstery codes as a starting point, but always follow the specific care instructions:

  • W means water-based cleaning products are suitable, but it doesn't automatically mean you can soak, machine wash or steam clean the upholstery.
  • S means you need a suitable upholstery solvent. Avoid water-based cleaning unless the manufacturer permits it.
  • W/S means you can use either an approved water-based cleaner or a suitable solvent cleaner.
  • X means you should only vacuum or brush lightly. Seek specialist advice for stains.

Test your chosen cleaner on a hidden area and let it dry fully. Check for colour transfer, stiffness, water rings, loss of sheen or a sticky surface. Stop if you notice any change, even if the product label says it suits that upholstery type.

Prepare your RV seats for deep cleaning

Remove loose cushions, throws and any debris you can reach. Photograph the cushion positions if your dinette converts into a bed, and keep removable parts together. Don't assume you can wash a zipped cushion cover or easily refit it after removal.

Vacuum slowly with an upholstery attachment, then use a crevice tool along piping, seams, backrest gaps and cushion edges. Work gently over worn fabric and loose stitching. Remove grit first so it doesn't turn into muddy residue during wet cleaning.

Protect nearby timber, flooring, metal fittings and electrical controls. Follow the vehicle manual before working near powered seats, and never spray switches, wiring connectors, seat-belt buckles or retractors. Clean belt webbing only as the vehicle manufacturer directs, rather than treating it like upholstery.

How to treat upholstery stains and odours

Blot a fresh spill with a clean, white absorbent cloth, working from the outside towards the centre. Lift solid food carefully rather than rubbing it into the fibres. Use a spot cleaner that's safe for the material, and apply it sparingly to a cloth where practical rather than pouring it onto the seat.

For greasy marks, use an approved upholstery degreaser or solvent only if the care instructions allow it. You may need an enzyme cleaner for food, milk or pet accidents to break down certain organic residues. Check that it's safe for the material and leave it on for the specified time. Adding more product won't necessarily remove more dirt.

Remove the odour source instead of covering it with fragrance. If a smell returns after surface cleaning, check for contamination inside the cushion foam, backing or seat base. You may need to treat saturated foam separately or replace it, particularly after urine or repeated spills.

Never mix cleaning products. If you change products, follow the instructions for removing the previous cleaner rather than applying another chemical over it.

How to clean different upholstery materials

For fabric that allows water-based cleaning, dilute a low-residue upholstery cleaner as directed and apply it evenly across a manageable section. Gently work it in with a soft upholstery brush or microfibre cloth, following the fabric's texture. Where appropriate, clean the whole visible panel between seams, since isolated wet patches can leave rings.

Keep moisture to a minimum during extraction. An upholstery extractor sprays cleaning solution and immediately vacuums it back out. Use an upholstery tool, minimal solution and extra suction-only passes to remove moisture rather than repeatedly soaking the same area. Check the care instructions to see whether you need a separate rinse.

A steam cleaner applies hot vapour but may not recover moisture or dissolved dirt. Don't assume steam is safe because it uses little detergent. Heat can damage sensitive finishes, adhesives or laminated coverings, so use it only if the upholstery manufacturer explicitly approves it.

For finished leather, use a compatible leather cleaner on a soft cloth or brush, remove residue and dry the surface. Avoid saturating perforations and seams. Apply a conditioner or protectant only if the leather manufacturer recommends one. Seek specialist cleaning methods for suede, nubuck and unfinished leather.

Clean vinyl and faux leather with a compatible mild cleaner, then wipe away residue as directed and dry the surface. Avoid abrasive pads, strong solvents and unapproved oily dressings. You can't repair peeling coatings, cracked vinyl or deteriorating bonded leather by cleaning them.

How to dry RV cushions after cleaning

After wet cleaning, lift removable cushions and support them so air can reach both sides without distorting their shape. Use ventilation, fans and, where needed, a dehumidifier. Keep damp cushions off timber surfaces, and don't refit covers or bedding until everything is dry.

A dry surface is not enough if moisture remains in the foam. Check seams, cushion undersides and thicker sections before using the seats. Don't rely on a fixed drying time of a few hours. Your cushions may take longer depending on their construction, airflow and how much water you used.

The US Environmental Protection Agency recommends drying wet materials within 24 to 48 hours to help prevent mould growth. Aim to dry your upholstery promptly rather than treating this as permission to leave it damp. If the cushions remain wet inside, improve airflow or seek professional help promptly.

When should you hire a professional upholstery cleaner?

Choose professional cleaning for solvent-only fabrics, delicate upholstery, extensive staining or cushions you can't clean without disturbing electrical components. If you find visible mould, contamination from liquids or persistent smells beneath the covering, seek professional assessment rather than repeatedly washing the surface.

Ask the cleaner how they identify the material, test colourfastness, limit moisture during extraction and check that cushions are dry. Explain your previous cleaning attempts and point out loose seams, peeling finishes or existing water marks. Ask about stain removal, but don't expect a guarantee: old dye stains, bleaching and permanent material damage may remain even after thorough cleaning.

Sources