You can use a pressure washer to clean an RV only if the RV manufacturer permits it and you use settings and techniques suitable for its exterior. A garden hose and soft wash brush are the safer choice because concentrated jets can damage decals, loosen sealant and force water behind panels or fittings.
When is it safe to pressure wash an RV?
Check your owner's manual before connecting the washer. Look for instructions for the body finish, roof membrane, graphics and slide-outs, as each may have different cleaning restrictions. If the manual prohibits pressure washing, don't assume you can safely use a lower setting.
Inspect the exterior closely before you decide. If you find peeling graphics, cracked sealant, loose trim, exposed panel edges or damaged paint, don't pressure wash the RV until you've repaired those areas. Water entering a small opening can wet insulation or interior panels without leaving an immediately visible leak.
Even if your RV has no visible damage, use the washer only on broad, undamaged surfaces that the manufacturer permits you to pressure wash. Don't assume that painted aluminium, gelcoat, laminated sidewalls and vinyl wraps can withstand the same treatment.
What pressure washer settings should you use on an RV?
There's no universal safe PSI for every RV. PSI measures pressure, but the nozzle pattern, water flow, spraying distance and surface condition also affect how forcefully water strikes the exterior. Follow any pressure limit and minimum spraying distance your RV manufacturer specifies.
If the manufacturer permits pressure washing, start at the machine's lowest effective setting with a wide fan nozzle, commonly a 40-degree tip. Avoid zero-degree tips, narrow concentrated jets and rotating turbo nozzles. A wide nozzle spreads the spray but doesn't make a high-pressure setting safe.
Start roughly a metre away from an inconspicuous, undamaged panel, unless the manual specifies a greater distance. Keep the wand moving and move closer only if the manufacturer's guidance allows it. Stop if you see graphics lifting, sealant moving or changes to the finish.
If your washer can't produce a gentle rinse, use a hose instead. Never move closer simply because dirt remains. Loosen it with suitable shampoo and a soft brush rather than spraying with more force.
Which RV parts should you avoid pressure washing?
Keep pressurised water away from openings, even when doors and windows appear fully closed. Don't assume their seals can withstand a concentrated jet. Avoid spraying these areas directly:
- Window seals, door seals, roof seams, panel joints and screw heads covered with sealant.
- Decal edges, vinyl graphics, protective films, peeling paint and chipped finishes.
- Appliance vents, refrigerator access panels, furnace outlets and air-conditioner openings.
- Electrical sockets, cable entries, solar connectors, cameras and exterior lights.
- Slide-out seals, awning fabric, awning mechanisms and exposed lubricated parts.
- Tyre sidewalls, wheel bearings, brake components and damaged wheel finishes.
Clean these areas by hand with products suitable for the material, then rinse gently where permitted. Don't spray upwards beneath siding, trim or overlapping panels. If you direct water into an overlap, you can force it behind the exterior skin.
How should you wash your RV?
Use an RV-compatible shampoo approved for your finish, a clean soft-bristled wash brush or microfibre mitt, and separate tools for the wheels. Avoid household degreasers and abrasive cleaners unless the component manufacturer specifically allows them.
- Prepare your RV. Close windows, doors and roof vents. Switch off the washer before connecting accessories, and protect electrical connections from water. Don't block an operating appliance's intake or exhaust.
- Rinse loose grit gently. Work from the upper sidewalls downwards, keeping the spray away from sensitive fittings. Use a hose around openings and seams.
- Apply shampoo at the dilution stated on its label. Work in manageable sections so the solution doesn't dry on the surface.
- Loosen dirt gently with your mitt or brush. Rinse the tool frequently, and use an approved spot cleaner for stubborn insect residue or black streaks.
- Rinse each section thoroughly with the least force needed. Keep the nozzle moving and direct runoff down the body rather than into joints.
- Wash wheels separately, then dry accessible panels and glass with clean microfibre towels. Don't use wheel-cleaning tools on the bodywork.
Operate the wand from stable ground, not a ladder. Never point the jet at yourself, another person or an animal. The U.S. Consumer Product Safety Commission warns that pressure washers can cause serious injuries. Seek prompt medical attention if a jet forces water through your skin, even if the wound looks small.
Can you pressure wash an RV roof?
Don't assume you can pressure wash the roof. EPDM, TPO, PVC and fibreglass roofs have different care requirements. You also need to protect the sealant around rooflights, vents, solar mounts and perimeter joints. Follow both the roof material care instructions and your RV manufacturer's guidance.
Unless those instructions expressly permit pressure washing, use an approved roof cleaner, a soft brush and gentle rinsing. Don't scrub aggressively or substitute a strong solvent for the specified cleaner.
Check that the roof can support your weight before you step onto it. If you can't clean it from a suitable work platform without overreaching, ask an RV detailing professional with appropriate access equipment to do the job.
What should you check after washing your RV?
Check around windows, access doors, slide-outs and interior ceiling edges for fresh dampness. If you find water inside, stop washing and get someone to find and repair the leak before you use more water. Don't apply new sealant over a wet or dirty joint.
Check graphics and trim for lifting edges, then dry any remaining accessible areas where water has collected. Apply wax, sealant or another protective product only if it's suitable for that finish. Don't assume products intended for painted panels are safe for graphics or roof membranes.
If the manufacturer prohibits pressure washing or you're unsure about the exterior's condition, stick to a hose and soft brush. You can usually remove ordinary road dirt with shampoo, gentle brushing and thorough rinsing, without relying on a forceful jet.
Sources
- U.S. Consumer Product Safety Commission (cpsc.gov)